Your Secret Weapon for Network Monitoring….

Ciscocmd Network Monitoring and Automation System: Simple, Remarkable, Powerful, Comprehensive, Monitoring, and Automation System for Network Administrators.

Take Control of Your Network by using my amazing system to gain deep visibility into every significant event and link on your entire global Network. Learn what links are over utilized, what switches are running low on port capacity, how to monitor your wireless network, capture physical layer errors.

Dear Friend and Network Administrator,

After working for years as I network administrator I have discovered and compiled a powerful an unbeatable set of network monitoring tools that have allowed me to keep track of thousands of network ports on a fortune 100 network. Similar commercially available tools usually cost thousands of dollars.

ZYNGA, FACEBOOK, GOOGLE

This system was created while working with engineers from Zynga, Facebook, and Google. Working closely with these engineers we developed a way to keep “our finger on the pulse” of the network. We were able to monitor thousands of ports, thousands of links, thousands of Syslog messages, all at a glance.

BURNED BY EXPENSIVE MONITORING TOOLS.

Early in my career, more senior network administrators frequently pushed hard to purchase expensive monitoring systems. Purchasing the monitoring system required lobbying multiple layers of management, dealing with slick sales guys, getting through the purchase process, installation, configuration, maintenance contracts, purchasing licenses. All of this nonsense frequently resulted in NO ADDED VALUE.

I started trying to figure out why did these tools often become such expensive failures. I came to the startling conclusion Network Administrators are over worked We just do not have time to deal with a behemoth tool suite that requires all of our attention. So the expensive tool suite DIES.

NO ALTERNATIVE…UNTIL NOW

Surprisingly, the response of most networking groups is to double down and purchase another expensive tools suite in the hopes that this will be the one. Why do they do this. THEY HAVE NO ALTERNATIVE….until now. Ultimate Automation is the way to break this losing cycle.

I am a person that is obsessed with truly valuable monitoring tools. I have searched and evaluated hundreds and hundreds of monitoring tools. I am disappointed 99% of the time with the tools I come across. These tools are either too complex, require too much time maintenance, require dedicated resources, are extremely expensive, or ultimately cannot provide the depth of information as I am looking for. Each time, I realize how powerful my system is for monitoring networks.

I want to describe a flexible and powerful automation tools and techniques that will give you unprecedented visibility into your entire network. Among other things, you will gain bandwidth and error visibility into every single interswitch link on your network you can also gain deeper visibility into your wireless networks using the tools and techniques described.

ZEN LIKE STATE OF AWARENESS

With my system you can achieve a Zen like state of hyper awareness, where you know every network bandwidth hotspot on your network, every significant physical layer hotspot on your network, the port utilization of every switch on your network. Imagine for the first time in your career…silence.

• No Pagers Sounding Off
• No Urgent 2 am phone calls
• No War Rooms
• No Panic
• No Anxiety

Just Silence……Or maybe the sound of your kid’s excited scream when you come home early.

A New You in 7 Days. Relaxed, Calm, In Control

What you get with my automation and monitoring system:

• Information on how to use the Ciscocmd automation tool
• Technique to monitor all of your access switch uplinks for physical layer errors.
• Technique to monitor switchport capacity for all of your Cisco switches and routers.
• How to extend the ciscocmd tool to monitor your wireless networks.
• How to monitor bandwidth capacity for all of your interswitch links.
• AWK – Introduction, references, techniques, and tips for using this amazing scripting language for network administrators.
• SED – Introduction, references, techniques, and tips for using the another amazing scripting language for network administrators.

Wait There’s More…

You will receive “The Ultimate Syslog Monitor” Ebook as a free gift with the your purchase. The information provided in this ebook alone is incredibly valuable and powerful. It is used to monitor real time syslog events in fortune 100 companies.

Here are some of the things you can do with the open source system described in the “Ultimate Syslog Monitor”

Availability monitoring

The Ultimate Syslog monitor is capable of alerting operations personel much faster than traditional availability ping monitors, which typically have alert times of 5 to 10 minutes. In comparison, The USM can alert operations personel to a down status in as little as 10 seconds from the event occurence.

System Condition Monitoring

Alert operations personel within seconds of a network CPU raising to dangerous levels. It can even inform operations users when links are taking errors or a system memory leak is occuring.

Power Status Monitoring

Monitor network device power error conditions that generate syslog messages such as failed or impaired power supplies, and redundancy mode changes.

Monitor Network Activity

Alert Personnel when a system change or configuration is being made with specific information about the person performing the change. Track additional activity such as clear counters and router logins.

Module Online Insertion and Removal Monitoring
Gain visibililty into maintenace activities by monitoring card insertion and removals. Gain visibility into module health by being alerted if module goes offline.

Update information to internal monitoring sites – Publishing desired information to the web

Network Monitoring and Automation System + The Ultimate Syslog Monitor = A Great Value

Each system alone will save you thousands and thousands, maybe even hundreds of thousands of dollars (yes I am being serious here). What I am really selling the hard won knowledge I have gained over years of experience to help you accelerate your own path to network hyper-awareness today for the ridiculously low price of $9.99 $2.99.

You read this correctly. Because many of my customers are in China and India and may be reluctant to try my system, I want to make it easy and provide an opportunity for everyone to use this great system. I am offering this system for $2.99 for a limited time.

Now you have no excuses. You owe it to yourself to try this excellent system. You have nothing to lose everything to gain. For the price of a cup of coffee you can detect and avoid serious network capacity and performance issues for years to come across global scale networks. In addition you learn valuable techniques that can be extended into wireless networks, network mapping, etc, etc….

Satisfaction Assured – If this system does not increase your ability to monitor your global network please send an email to info@enetworkadmin.net. I will personally try to ensure that the system is working for you. However, if you are still unsatisfied, I will gladly refund your purchase price. Also, if you would like to discuss the system before your purchase, feel free to send email to info@enetworkadmin.net. Again, I will gladly answer your questions.

NOTE: Due to a large amount of internet fraud, I cannot guarantee automatic refunds. Again, please contact me at any time before your purchase if you have questions and/or after your purchase if you would like a refund and I will authorize it. You can contact me at info@enetworkadmin.net

For more information about the Ciscocmd Automation System as well as the Ultimate Syslog Monitor, please refer to enetworkadmin.net

Excerpt From The Ciscocmd Network Monitoring System

Cisco Command – The Ultimate Little Tool

ciscocmd is a beautiful utility written by Alain Degreffe (eczema@ecze.com). You can download ciscocmd at http://sourceforge.net/projects/cosi-nms/files/ciscocmd/. It is a simple script that runs on with both Windows and Unix. You need to have TCL/Expect loaded in order for this utility to run.

Here is the output if you run it with no input variables.

——————————————————————————————–
./ciscocmd
ioscmd v1.1 written by Alain Degreffe

Usage: ioscmd [OPTION]…
Send command(s) to cisco host.

-h –help display this help message.
-u –username define the username password.
-p –password define the telnet password.
-s –secretpassword define the enable secret password.
-t –target define the hostname to connect.
-T –targetfile d